(Reference letter written by the General Manager of the Shipping Department)
"One of our Mitsubishi delivery trucks that was treated with Bi-Tron Engine
Treatment 2 weeks before, had cracked an oil filter, which caused a complete loss of oil. When
the driver noticed what happened, she drove the truck without oil about 20 km, directly to a repair shop. After the oil filter was replaced and the engine inspected, it was found that the engine was not damaged. I have to note that a month before this incident, similar thing happened to another vehicle that was not treated with Bi-Tron Engine Treatment, after 2 km driving without oil the engine seized-up and had to be completely overhauled."
Bi-Tron - effect on air tools
The decision was made to mix Bi-Tron Engine Treatment with our industrial oil, fill all of our air
tool oilers, and measure the effect on repair. The amazing results below show a very gratifying
savings.
Without Bi-Tron:
During a six month period the cost of spare parts for air tools was:
$ 862.00 per month
Labor for repair was:
$1,506.00 per month
_____________________
TOTAL : $2,369.91 per month (or $28,438.92 per year).
With Bi-Tron there has been no maintenance performed but to fill the oilers. Taking into
consideration the cost of Bi-Tron that was used per year the savings for the year was $25,300USD.
Bi-Tron - Screw Compressor Results:Without Bi-Tron:
The oil temperature of PAC 250 screw compressor was running 192 degrees, and its air up to
240 degrees and than shutting off. We had the air and the oil coolers of the compressor serviced, but it continued to automatically shut-off about every one and a half hours. It than stayed off until it cooled down, about one and a quarter hours.
The compressor holds 180 quarts of premium oil to the full mark, priced at $7.08 per quart (so the cost of an oil change was $1,274.40). We were changing the oil very often to reduce the down time.
With Bi-Tron:
We replaced the premium oil with a mixture of industrial oil (165 quarts, $0.88 per quart) blended with approx 8% of Bi-Tron (15 quarts, $20 per quart).
The total cost of the replacing mixture of the industrial oil and Bi-Tron was:
Industrial oil - 165 quarts x $0.88 = $145.20
Bi-Tron - 15 quarts x $20.00 = $300.00
__________________________________________
TOTAL = $445.20
The oil temperature was reduced from 192 to 160 degrees and the air temperature was reduced
from 240 to 200 degrees, and no more shutdowns occurred.
The cost of the replaced oil was 165 quarts x $7.08 = $1,274.40 each oil change.
Since the industrial oil and Bi-Tron Engine Treatment mixture lasted 15 times longer before we
changed it, the savings on the oil alone was more than $19,000, in addition to the considerable
savings as a result of almost complete elimination of down time.
Bi-Tron - Effect on 15 Ton Overhead Crane:
"I drive a 15 ton overhead crane and my primary operation is to service the Furnace Department
melting furnace. I service many of the functions, such as loading the 3 ton electric furnace,
tapping the furnace and transferring molten metal from the furnace to the pouring floor. In all of
these functions the crane is exposed to extreme temperature ranging from 2950 to 3200 degrees. I have worked for about one year at this occupation and from the very start the crane performed very sluggish and moved slowly making my job more difficult and less accurate in performance.
Since Bi-Tron Grease was injected into all the moving
parts of this crane I have experienced great results, it moves much easier , coasts farther, is much more responsive to control
and direction, which gives me more control and accuracy of operation and higher degree of safety in job performance. The findings by the supervision department indicate reduction in
kilowatt hours (electrical energy consumption) used in one year per crane and the considerable reduction in maintenance and repair of the electric motors."
|
